UAE GI Coil Supply
Hot-dip galvanized steel coils and sheets supplied to project-specific grade, thickness, width, zinc-coating, surface-finish and documentation requirements.
SRK Steel reviews UAE GI coil requirements for roofing, cladding, profiling, fabrication and sheet-processing work. Enquiries are matched against grade, base-metal thickness, width, zinc coating requirement, quantity and documentation rather than a generic coil description.
For Dubai, Abu Dhabi, Sharjah and other Emirates, include the delivery location, required timeline, coil-weight or handling limits where relevant, and any material-document requirement so the quotation can be compared on a like-for-like basis.
1 / 5Product Scope
SRK Steel supplies Hot-Dip Galvanized Steel Coils (GI Coils) and Galvanized Steel Sheets manufactured in accordance with leading ASTM, JIS and EN specifications. Material can be supplied with agreed mechanical, dimensional and zinc-coating requirements for industrial, construction and fabrication applications.
For a UAE GI coil RFQ, specify the steel grade, base-metal thickness, coil width, required zinc coating, quantity or coil-weight preference, documentation requirement and delivery Emirate. This helps distinguish a true project match from a quotation that only matches the words “GI coil”.
UAE buyers frequently need GI coil as input material for profiled roofing and wall sheets, cladding components, fabrication and general sheet processing. The correct quotation therefore depends on what the coil will become after delivery, not only on total tonnage.
When the project specification states a zinc coating such as Z60, Z120, Z180 or Z275, copy that requirement into the RFQ together with the base-metal thickness and width. Do not compare quotations where coating or thickness basis differs.
For active UAE sites, state whether the material is for direct project use, workshop processing or profiling. Add the delivery Emirate, receiving constraints and expected delivery window so packing and dispatch requirements can be discussed before order confirmation.
If the BOQ or consultant specification names a standard, grade, certificate or approved-equivalent rule, include it with the enquiry. SRK Steel supplies and sources against the stated requirement; it should not be assumed that one generic GI coil specification suits every UAE project.
| Material | Galvanized Steel / Hot-Dip Galvanized Steel |
|---|---|
| Supply & processing | Galvanized coil supply, cut-to-length and slitting subject to the required specification |
| Typical thickness range | 0.20–2.50 mm coil/slitting; 0.20–5.00 mm cut-to-length, as specified |
| Typical width range | Up to 1,219 mm coil; up to 2,000 mm cut-to-length; slit widths from 50 mm, as specified |
| Zinc coating | 60–275 g/m² in the documented supply range |
| Standards referenced | ASTM A653/A653M, EN 10346 and JIS G 3302 |
| RFQ details | Grade, thickness, width, coating designation, finish/treatment, quantity, packing, MTC/documentation and delivery location |
| Country | UAE — Dubai, Abu Dhabi, Sharjah and other Emirates |
| Procurement focus | Fast specification confirmation, coating/thickness comparison, documentation and delivery coordination across UAE project locations. |
| RFQ details | Grade, size, thickness, finish, quantity, delivery city and drawings where available. |
Country RFQ Comparison
Use the project specification first, then align quantity, documents, packing and delivery scope before comparing commercial offers.
| Parameter | Why it matters | RFQ basis |
|---|---|---|
| Material | Defines the material or grade basis that the quotation must match. | Galvanized Steel / Hot-Dip Galvanized Steel |
| Supply & processing | Defines the product form, profile or supply configuration required for the job. | Galvanized coil supply, cut-to-length and slitting subject to the required specification |
| Typical thickness range | Controls dimensional compatibility with drawings, processing equipment and installation requirements. | 0.20–2.50 mm coil/slitting; 0.20–5.00 mm cut-to-length, as specified |
| Typical width range | Controls dimensional compatibility with drawings, processing equipment and installation requirements. | Up to 1,219 mm coil; up to 2,000 mm cut-to-length; slit widths from 50 mm, as specified |
| Zinc coating | Controls appearance, corrosion protection or downstream processing requirements where specified. | 60–275 g/m² in the documented supply range |
| Standards referenced | Helps buyers compare quotations against the same technical and commercial requirement. | ASTM A653/A653M, EN 10346 and JIS G 3302 |
| RFQ details | Prevents incomplete or non-comparable quotations by stating the purchase-ready inputs. | Grade, thickness, width, coating designation, finish/treatment, quantity, packing, MTC/documentation and delivery location |
Include steel grade, base-metal thickness, width, required zinc coating, quantity, preferred coil weight if relevant, documentation needs, intended use and delivery Emirate. Attach the BOQ or specification when the project controls a standard, grade or coating designation.
SRK Steel reviews enquiries across the 60gsm to 275gsm range subject to the exact project specification and availability. State the coating requirement exactly as specified and compare quotations only when thickness, width, grade and coating basis are equivalent.
ASTM A653/A653M is a common reference for hot-dip zinc-coated steel sheet, but the applicable standard must come from the project or approved material specification. Include the required grade and coating designation instead of relying on the standard name alone.
SRK Steel reviews GI coil enquiries as a supplier and sourcing partner against the requested grade, base-metal thickness, width, zinc coating, quantity, documentation and delivery requirement.
