Jordan Galvanized Coil Supply
Hot-dip galvanized steel coils and sheets supplied to project-specific grade, thickness, width, zinc-coating, surface-finish and documentation requirements.
Jordan GI coil enquiries are reviewed by grade, thickness, width, zinc coating, quantity and application. Buyers using the material for fabrication or profiling should state the downstream process so the coil requirement is not reduced to a generic price-per-tonne comparison.
For Amman, Zarqa, Aqaba and other project locations, add the delivery destination, processing needs and any consultant or material-document requirements with the RFQ.
1 / 5Product Scope
SRK Steel supplies Hot-Dip Galvanized Steel Coils (GI Coils) and Galvanized Steel Sheets manufactured in accordance with leading ASTM, JIS and EN specifications. Material can be supplied with agreed mechanical, dimensional and zinc-coating requirements for industrial, construction and fabrication applications.
A Jordan galvanized steel coil RFQ should state the grade, base-metal thickness, width, zinc coating, quantity, processing use, documentation and delivery destination. This makes it easier to compare offers on the same technical basis.
Jordan buyers may request GI coil for fabrication, roofing, cladding or formed sheet components. State the intended use and processing route so width, thickness and coating can be reviewed against the actual requirement.
A zinc coating designation should be treated as its own specification point. If the BOQ or drawing defines the coating, grade or standard, include that reference in the enquiry rather than requesting simply “GI coil”.
For workshop processing, add any width or coil-weight limits. For project supply, include destination, required delivery timing and whether quantity will be taken in one release or split across stages.
Material documentation and substitution rules should be clear before pricing. If equivalent material is allowed, note the approval process so the quotation can separate compliant options from unapproved alternatives.
| Material | Galvanized Steel / Hot-Dip Galvanized Steel |
|---|---|
| Supply & processing | Galvanized coil supply, cut-to-length and slitting subject to the required specification |
| Typical thickness range | 0.20–2.50 mm coil/slitting; 0.20–5.00 mm cut-to-length, as specified |
| Typical width range | Up to 1,219 mm coil; up to 2,000 mm cut-to-length; slit widths from 50 mm, as specified |
| Zinc coating | 60–275 g/m² in the documented supply range |
| Standards referenced | ASTM A653/A653M, EN 10346 and JIS G 3302 |
| RFQ details | Grade, thickness, width, coating designation, finish/treatment, quantity, packing, MTC/documentation and delivery location |
| Country | Jordan — Amman, Zarqa, Aqaba and project locations |
| Procurement focus | Application matching, processing limits, coating/grade clarity, documentation and Jordan delivery planning. |
| RFQ details | Grade, size, thickness, finish, quantity, delivery city and drawings where available. |
Country RFQ Comparison
Use the project specification first, then align quantity, documents, packing and delivery scope before comparing commercial offers.
| Parameter | Why it matters | RFQ basis |
|---|---|---|
| Material | Defines the material or grade basis that the quotation must match. | Galvanized Steel / Hot-Dip Galvanized Steel |
| Supply & processing | Defines the product form, profile or supply configuration required for the job. | Galvanized coil supply, cut-to-length and slitting subject to the required specification |
| Typical thickness range | Controls dimensional compatibility with drawings, processing equipment and installation requirements. | 0.20–2.50 mm coil/slitting; 0.20–5.00 mm cut-to-length, as specified |
| Typical width range | Controls dimensional compatibility with drawings, processing equipment and installation requirements. | Up to 1,219 mm coil; up to 2,000 mm cut-to-length; slit widths from 50 mm, as specified |
| Zinc coating | Controls appearance, corrosion protection or downstream processing requirements where specified. | 60–275 g/m² in the documented supply range |
| Standards referenced | Helps buyers compare quotations against the same technical and commercial requirement. | ASTM A653/A653M, EN 10346 and JIS G 3302 |
| RFQ details | Prevents incomplete or non-comparable quotations by stating the purchase-ready inputs. | Grade, thickness, width, coating designation, finish/treatment, quantity, packing, MTC/documentation and delivery location |
Share grade, base-metal thickness, width, zinc coating, quantity, intended processing or application, required documents and delivery location. Add any coil-weight limit or staged quantity plan when relevant.
Yes. SRK Steel reviews Jordan project enquiries for galvanized coil used in fabrication, profiling, roofing and cladding, subject to the exact specification and availability.
Yes, when the project specifies one. The coating requirement should be stated separately from the base-metal thickness so quotations can be compared accurately.
Yes. State staged quantities, required delivery timing and any workshop coil-width or coil-weight limits so the supply option can be reviewed against both processing and project needs.
